Quick Menu
  • 1

Enslaved Light | Events | 2004 | Equilibrium Case Mod


5900 ultra with its water block also had to glue small heatsinks to the ram chips it is a 256mb card (37722842)
A closer pic of it (37722840)
A picture of my pump mounted under the HD cage (37722834)
A shot showing where the fittings come through (37722822)
a side picture of the rad (37722820)
Almost done (37722855)
and more (37722860)
angle door one open (37722873)
another pic of it (37722833)
another pic of it eventually I have to turn it 90 degrees (37722826)
another picure of the front both doors open (37722862)
back of the case wiring and fan (37722866)
blacked out some wires so its looked cleaner (37722851)
Both cages removed (37722818)
close up of the heat skrinked ends (37722812)
coverd psu i used a wierd adhiesive so i was worried about fire but its been all good (37722837)
cutting out rubber matting for my psu (37722836)
deciding on a color for my thumn screws (37722857)
doing more and more (37722859)
door one open (37722869)
Enlarged the holes for the fan and made a hole for the rad connections (37722813)
from the bottom (37722838)
from the front (37722830)
from the front next custom case the IR is going to be intergrated better (37722864)
from the other side (37722856)
from the side (37722843)
frons with both doors open you can see my fan controller which is normally hidden (37722854)
front with second door closed (37722853)
good shot of the wheels (37722875)
Had to drill the rivits out in the front to remove the HD and Floppy Cages (37722817)
handles mounted another must have on a case (37722829)
Hard drive fully wired up and room for one more (37722849)
heatshricked the usb cable for the external IR (37722865)
her are what they look like (37722861)
Here is a look inside without the HD cage (37722814)
Here is my 5900 ultra stripped down (37722810)
Here is my first remount of the hd cage but later i relize it wont work so I turn it 90 degrees and rivit it back on (37722825)
Here is the HD cage remounted (37722839)
i end up with the half red half black (37722858)
i liked this shot (37722874)
I shortend all the cables by around 6 -12 inches (37722835)
Im covering my psu cables (37722811)
inside (37722877)
Inside 120mm fan mounted (37722823)
lights out i acutally dont like light and my next case mod will have no window (37722878)
lol dont ask about the paper i have a reason you will see it at the end (37722868)
Lol I got excited installing the tubing and forgot to take pictures so here it is almost done (37722845)
marking postions for the handles (37722827)
Mounted my dvd burner and my matrix orbial above my rez (37722848)
My MB with my cpu and chipset water blocks mounted (37722841)
my nice wiring job before i redid the cage (37722832)
Now that the rad was so close the the edge of the case i had to dremel out part of the door so it would fit (37722831)
Preparing the Rad with bolts and weather striping (37722819)
put the psu in it (37722844)
removed the feet that came with it (37722816)
riveted some wheels on the bottom (37722824)
side off (37722870)
side off (37722876)
side off again (37722871)
side on (37722872)
Some wires inside it now (37722847)
taking picture of it now (37722867)
the final case side off (37722880)
the final case with the side on (37722879)
the handles up close and my IR sensor in the back right for my computers remote control (37722863)
The rad mounted and the external fan mounted on it (37722821)
wireing is almost done (37722850)
Wiring is pretty much done but its messy build two thats one thing i tried to help (37722852)
with fluid in it (37722846)
With the cage that will be removed soon (37722815)
  • 1

5484 Photos | Recent Photos | Contact Me | Order Prints | AddThis Feed Button AddThis Social Bookmark Button
All images Copyright © 2004 - 2008 Jeffrey Klassen. All rights reserved. Unauthorized use is prohibited.
Zen Photo